xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
330
DGS–3426:5#create jwac user 112233
Command: create jwac user 112233
Enter a case–sensitive new password:***
Enter the new password again for confirmation:***
Success.
DGS–3426:5#
config jwac user
Purpose Used to update local user DB.
Syntax
config jwac user <username 15> {vlan <vlanid 1–4094>}
Description This command is used to update the local user DB. Only the created user can be
configured.
Parameters <username 15> – The user name to be created. The max length of the username is 15
characters.
<vlanid 1-4094> –Target VLAN ID for authenticated host which uses this user account to
pass authentication.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure a JWAC user:
DGS–3426:5# config jwac user 112233
Command: config jwac user 112233
Enter a old password:**
Enter a case–sensitive new password:***
Enter the new password again for confirmation:***
Success.
DGS–3426:5#
delete jwac user
Purpose Used to delete JWAC user into local DB.
Syntax
delete jwac [user <username 15> | all_users]
Description This command is used to delete JWAC users from the local DB.
Parameters user – To specify the user name to be deleted
all_user – All user accouts in local DB will be deleted.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete a JWAC user:
