xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
40
DGS–3426:5#create snmp user dlink default encrypted by
password auth md5
canadian priv none
Command: create snmp user dlink default encrypted by
password auth md5 canadian
priv none
Success.
DGS–3426:5#
delete snmp user
Purpose Used to remove an SNMP user from an SNMP user table.
Syntax
delete snmp user <username 32>
Description This command is used to remove an SNMP user from its SNMP group and then deletes
the associated SNMP group.
Parameters
<username 32> − An alphanumeric string of up to 32 characters that identifies the SNMP
user that will be deleted.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete a previously entered SNMP user on the Switch:
DGS–3426:5#delete snmp user dlink
Command: delete snmp user dlink
Success.
DGS–3426:5#
show snmp user
Purpose Used to display information about each SNMP username in the SNMP username table.
Syntax
show snmp user
Description This command is used to display information about each SNMP username in the SNMP
username table.
Parameters None.
Restrictions None.
Example usage:
To display the SNMP users currently configured on the Switch:
DGS–3426:5#show snmp user
Command: show snmp user
Username Group Name VerAuthPriv
––––––––––––––––––––––––– –––––––––––––––––––––––––– –––––––––––
u3 g3 V3 NoneNone
initial initial V3 NoneNone
Total Entries: 2
DGS–3426:5#
