Filter
Top Products
Page 30
Figure 9-4. Hoist Motor Brake - Early Version.
Ref. Part Qty.
No. Number Description Req’d.
Motor Brake Assembly (Includes Ref. Nos. 1 thru 32) 1
800-1400 Short Frame Models Only
800-1401 Other Models
1 * Acorn Nut (#10-32) 2
2 800-1402 Brake Cover Assembly (Includes Brake Cover and Label Inside Cover) 1
3 * Cover Stud 2
4 * Gasket 1
5 * Hex Washer Head Thread Forming Screw (#10-32 x 1 -3/4) 4
6 * Solenoid Frame Cover Assembly 1
7 * Hex Key (1/8-3/4 x 2-1/4) 1
8 * Solenoid Coil Assembly 1
9 * Tubing 3
10 * Hex Nut (#10-32 Pltd.) 2
11 * Solenoid Frame 1
14 * Hex Head Self-Locking Nut (#10-24) 2
15 800-1403 Solenoid Support 1
16 * Hex Washer Head Thread Forming Screw (#10-32 x 1/4) 2
17 * Solenoid Plunger 1
18 800-1404 Hex Socket Head Self-Locking Set Screw - Oval Point (1/4 - 28 x 1) 1
20 * Clevis Pin (3/16 x 1-1/4) 1
21 * Flat Washer 2
22 * Brake Spring 1
23 * Brake Lever Assembly 1
24 * Pressure Pad 2
25 * Brake Disc (Non-asbestos) 1
26 * Brake Support Stud 2
27 * Separating Spring 2
28 * Hex Socket Head Self-Locking Set Screw - Cup Point (1/4 - 20 x 3/8) 2
29 * Brake Hub 1
30 * Hex Socket Head Screw (3/8 - 16 x 3/4) 2
31 800-1405 Brake Mounting Plate 1
32 * Wire Nuts — Not Shown (No. 22 thru 16 AWG) 4
* Not available as individual parts. See replacement kits listed below. Kits include quantities shown above.
12756A