Filter
Top Products
6—Using the S-1608/S-0816 System
54 S-1608/S-0816 Digital Snake Owner’s Manual
Memory Function
The S-1608/S-0816 system features 10 user-storable memory presets. A memory preset contains
channel settings (preamp gain, pad, phantom power, and stereo link) for all of the S-1608/S-0816
system’s 24 input channels. Using memory presets, you can quickly reconfigure the S-1608/S-0816 for
frequently used audio input setups.
Storing a Memory Preset (Memory Store Mode)
To store the current settings to a memory preset:
1. Press and hold [STORE] until its indicator lights solid.
2. Turn the [CHANNEL] knob until the desired memory preset (0–9) is shown in the CHANNEL
display.
The currently loaded preset displays a period (.) next to the preset number. If the currently
loaded preset is in a state different than the stored version, two periods are displayed.
fig.6-45.eps
3. Press [CLIP CLEAR / ENTER] to finalize your selection. (To exit Memory Store mode without
storing the current settings, press [STORE] so that its indicator goes out instead.)
4. If you wish to store the current settings to another memory preset, repeat Steps 2-3. To exit
Memory Store mode, press [STORE] so that its indicator goes out.
Recalling a Memory Preset (Memory Recall Mode)
To recall a memory preset:
1. Press and hold [RECALL] until its indicator lights solid.
2. Turn the [CHANNEL] knob until the desired memory preset (0-9) is shown in the CHANNEL
display.
The currently loaded preset displays a period (.) next to the preset number. If the currently
loaded preset is in a state different than the stored version, two periods are displayed (see the
illustration above). If you wish to retain the current settings, exit as indicated in Step 3.
3. Press [CLIP CLEAR / ENTER] to finalize your selection. (To exit Memory Recall mode without
making a selection, press [RECALL] so that its indicator goes out instead.)
4. If you wish to select another memory preset, repeat Steps 2-3. To exit Memory Recall mode,
press [RECALL] so that its indicator goes out.
If the S-4000R is in a locked state, it’s not necessary to unlock the unit before selecting or storing
presets. The unit is automatically unlocked when entering a Memory mode.
While a memory preset is recalled, all system outputs are temporarily muted.
Currently loaded preset Currently loaded preset (edited)
S-1608_e.book 54 ページ ２００７年４月２３日 月曜日 午後１２時５７分