Filter
Top Products
6—Using the S-1608/S-0816 System
36 S-1608/S-0816 Digital Snake Owner’s Manual
Using the REAC Connector Cover (S-1608 and S-0816)
The REAC port on the S-1608 and S-0816 units feature rugged Neutrik® EtherCon® connectors. As
discussed in Chapter 5, they can accept either standard RJ45 plugs or RJ45 plugs housed in EtherCon-
type connectors.
When using an Ethernet cable with standard RJ45 plugs, fit the included REAC connector cover on the
REAC port as shown.
fig.6-09.eps_50
Attaching the Rubber Feet
Attach these as required, such as when you’re using the S-1608 or S-0816 without mounting it on a
rack or the like. Peel off the double-sided tape from the rubber feet and affix the rubber feet at the
locations shown in the following figure.
Remove the REAC connector cover when using Ethernet cables (SC-W100S) with EtherCon-type
connectors.
REAC connector cover
S-1608_e.book 36 ページ ２００７年４月２３日 月曜日 午後１２時５７分