Filter
Top Products
4—Panel Descriptions
22 S-1608/S-0816 Digital Snake Owner’s Manual
S-4000R Front Panel
fig.4-05.eps
1—Signal Status Indicators
These indicator lights show signal status for each of the S-1608/S-0816 System’s 24 input channels.
• CLIP—lights red when the input signal exceeds 0 dB (after A/D conversion). Once a CLIP
indicator lights, it stays lit until cleared with the [CLIP CLEAR / ENTER] button.
• SIG—lights green when the input signal level is greater than -40 dB (after A/D conversion).
2—Memory Buttons ([RECALL] Button/ [STORE] Button)
The S-4000R provides ten memory presets for storing S-1608/S-0816 System’s input channel settings.
Use the [RECALL] and [STORE] buttons to recall and store settings.
3—[CHANNEL] Knob and CHANNEL Display
Use the [CHANNEL] knob to select an input channel for editing or signal level monitoring. The
currently selected channel is shown in the CHANNEL display.
The [CHANNEL] knob and CHANNEL display are also used to select memory presets and link odd/even
channel pairs (Stereo Link function).
S-4000R Remote Controller
The S-4000R was designed to also be used as a remote controller for the S-4000 systems (S-4000S or
S-4000H). Accordingly, there are 40 CLIP and SIG indicators. When using an S-1608/S-0816 system,
only channels 1 to 24 are enabled.
Please see the S-4000S Owner’s Manual when using an S-4000 system.
See Page 54 to learn how to recall and store memory presets.
See Page 51 to learn how to edit channel settings.
S-1608_e.book 22 ページ ２００７年４月２３日 月曜日 午後１２時５７分