Filter
Top Products
5—S-1608/S-0816 System Overview
S-1608/S-0816 Digital Snake Owner’s Manual 31
S-4000R Remote Controller
The S-4000R functions as a remote controller for the S-1608/S-0816 System. It can be connected to
either the S-1608 or S-0816 unit, whichever is most convenient for you.
•
Input channel control
—The S-4000R provides control over the S-1608/S-0816 System’s input
channels. This includes preamp gain adjustment, phantom power and pad on/off status, and
channel linking.
•
Input level monitoring
—An eight-segment LED meter allows for precise preamp gain adjustment
of the S-1608/S-0816 System’s input channels.
•
Signal status
—The S-4000R provides signal status indicators for all of the S-1608/S-0816
System’s 24 input channels.
•
Clip indicators
—The S-4000R provides channel clip indicators for all of the S-1608/S-0816
System’s 24 input channels.
•
Memory presets
—10 memory presets allow you to store and recall frequently used S-1608/S-
0816 System’s input channel setups.
Computer Control
All functions that can be controlled from the S-4000R can also be controlled from a personal computer
equipped with an RS-232C port(s), and running the S-4000 Remote Control Software (S-4000 RCS).
Up to four S-1608/S-0816 Systems can be controlled at once.
The S-4000 RCS is a free download from www.rolandsystemsgroup.net.
The S-4000R was designed to also be used as a remote controller for the S-4000 systems (S-4000S or
S-4000H). Accordingly, there are 40 CLIP and SIG indicators. When using an S-1608/S-0816 system,
only channels 1 to 24 are enabled.
Please see the S-4000S Owner’s Manual when using an S-4000 system.
Please see “Computer Control (S-4000 RCS)” (Page 56)for information regarding the S-4000 RCS.
There is no usage fee for the software, but the communication fees for downloading are your
responsibility.
S-1608_e.book 31 ページ ２００７年４月２３日 月曜日 午後１２時５７分