Filter
Top Products
6—Using the S-1608/S-0816 System
S-1608/S-0816 Digital Snake Owner’s Manual 39
Setting the [REAC MODE] Switches
fig.6-16.eps
The [REAC MODE] switch on the S-1608/S-0816 is recessed from the
front panel so that its setting can’t be changed inadvertently. To change
the switch setting, use a blunt-tipped instrument such as a ball-point pen,
mechanical pencil, etc.
With their power off, set the units as follows:
1. On the S-1608, set the [REAC MODE] switch to M.
2. On the S-0816, set the [REAC MODE] switch to S.
If the [REAC MODE] switch setting is changed when the unit is powered on, the new setting won’t
take effect until the unit is powered off and then back on again.
S-1608_e.book 39 ページ ２００７年４月２３日 月曜日 午後１２時５７分