Filter
Top Products
Problem Remedy
My proprietary telephone does not have a feature
button.
• Some models do not have the feature
button.
Change a flexible button to the desired
button. ( 3.1.3 Customising the Buttons)
Enter the specified feature number instead
of the feature button. ( 1.1.1 Before
Operating the Telephones
)
A reorder tone is audible or "Restricted" is
displayed.
• The telephone is locked.
Unlock your telephone. (
1.6.4 Preventing Other People from Using
Your Telephone (Extension Dial Lock)
,
2.1.1 Extension Control)
• Toll restriction is activated.
Consult your manager or dealer.
• An account code is required. (
1.2.7 Calling without Restrictions, Using
an Account Code (Account Code Entry)
in
1.2.1 Basic Calling)
I cannot make an outside call using the
One-touch Dialling button or speed dialling.
• A line access number was not stored.
A line access number is required for
outside calls. ( 1.2.1 Basic Calling,
3.1.3 Customising the Buttons)
I cannot remember the feature numbers.
• If the feature numbers have been changed
from the default values, write the new feature
numbers
in the table in "4.2.1 Feature Number
Table".
•
Ask your dealer to change the feature
numbers for easier use.
While talking to an outside party, the line is
disconnected.
• The time limit has run out. (
1.4.1 Transferring a Call (Call Transfer),
1.4.5 Multiple Party Conversation
)
Consult your dealer to extend the time limit,
if necessary.
Redialling does not function.
• The
stored number was more than 32 digits
or an extension number. (
1.2.3 Redial)
I cannot have a conversation using the Bluetooth
headset.
• Make sure that the headset is properly
registered to the module.
• Make sure that the headset is properly
charged according to the manual of the
headset.
•
Remove the wired headset from the
headset jack. Priority is given to the wired
headset when both are connected.
I cannot register, de-register, or confirm the ID of
the Bluetooth headset.
•
Make sure that the module is properly
installed in the IP-PT/DPT.
User Manual 233
4.1.1 Troubleshooting