Filter
Top Products
Item
Programming
Input
Selection & Parameter
One-touch Dialling
Assignment Mode
Selection
Do you prefer to set the
One-touch dialling only?
#
0
No—Normal (Any Flexible
buttons can be modified.)
1
Yes—Only One-touch
dialling
buttons can be modified.
However, to modify them, there
is no need to enter "2" before the
number.
*1
Not available for a PS
*2
Only available for KX-T7633
/KX-T7636/IP-PTs (except KX-NT265/KX-NT321)/KX-DT343/KX-DT346 telephones.
*3
CO button numbers (25–36) are available only when the Add-on Key Module is set up to your telephone.
*4
CO button numbers (25–84) are available only when the Add-on 60 Key Module (KX-NT305) is set up on a KX-NT300 series telephone
(not available for the KX-NT366).
*5
Not available for the KX-T7665
*6
This setting applies to both outside and intercom calls. For intercom calls, this feature must be enabled through system programming.
*7
Only available for certain digital proprietary telephones.
*8
Only available for KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346 telephones.
*9
Registering and cancelling a Bluetooth wireless headset may take time. Please avoid any interruption during that time by, for example,
going off-hook.
CAUTION
There is a risk that fraudulent telephone calls will be made if a third party discovers your
password (extension PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a. Keeping your PIN secret.
b. Selecting a complex, random PIN that cannot be easily guessed.
c. Changing your PIN regularly.
• After the programme number is entered, the programme title is displayed.
The programming screen can be changed with the Navigator Key (Up or Down).
• You can select the parameter with the Navigator Key (Up or Down) instead of entering a
number.
212 User Manual
3.1.2 Settings on the Programming Mode