Filter
Top Products
1.12 Exchanging the Settings between Extensions
1.12.1 Walking Extension
You can exchange the settings set at another extension with your own settings. This allows you to use your
own settings, including your extension number, on another person
’s extension. Settings such as extension
number and One-touch Dialling memory are available at the new extension. It is also possible to exchange the
DSS Console settings along with the extension settings. Walking Extension is useful, for example, when you
move to a new location in the office.
This feature is also known as Walking Station.
To exchange your settings with another extension
Off-hook.
Enter 727.
PT/SLT
your
extension no.
On-hook.
Dial your extension
number.
extension PIN
Enter extension PIN
(max. 10 digits).
2 77
D.Tone
PIN: Personal Identification Number
• An extension personal identification number (PIN) is required to use this feature. Refer to
" Assigning an Extension PIN to Your Extension (Extension PIN [Personal Identification
Number])" in "3.1.1 Customising Your Phone (Personal Programming)
".
• Your previous extension will receive the old settings of your new extension.
• Extension settings can be exchanged between SLT and SLT, PT and PT, or SLT and PT.
• If you are using a KX-NT400/KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346
telephone with a Bluetooth wireless headset, and exchange the settings with another
KX-NT400/KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346 telephone user, you
cannot use your Bluetooth wireless headset at the other extension.
Bluetooth wireless headsets are registered on extensions themselves. Therefore, you have
to register a Bluetooth wireless headset on each desired extension. For details about
registration, refer to "Bluetooth Registration" in "3.1.2 Settings on the Programming Mode".
User Manual 169
1.12.1 Walking Extension