Panasonic KX-NCP500 Wheelchair User Manual


 
Operation No. Operations
1
/
#
To play back the voice message from the beginning
2
To go to the next voice message
3
To clear the voice message
(Press the AUTO DIAL/STORE button or enter 1 to confirm.)
4
To call back the caller who left the voice message
*1
5
To go back to the previous voice message
#
6
To leave a voice message directly in the message box of another extension
(Enter desired extension number.)
#
8
To play back your greeting message and record a voice message in your own
message box
#
9
To end the call
*1
This operation is not available for SIP Extensions.
In addition to the caller information that is recorded in the Call Log, the following SVM Log information is
recorded with voice messages left by callers:
Caller’s Name
Caller’s Telephone Number
Time recording started
Voice Message Status
"New" is displayed for voice messages that have not previously been listened to.
"Old" is displayed for voice messages that have previously been listened to.
Please note that the information shown on the display may vary depending on the information that was
received and the type of telephone used. Only users of a 6-line display PT can view all of the above
information.
You
can lock the SVM Log display by using an extension PIN (Personal Identification Number) to prevent
other users from viewing the information and from playing back your voice messages (Display Lock). Refer
to "3.1.2 Settings on the Programming Mode".
If your telephone has a Message for Another Extension button, you can access the message box of another
extension and listen to voice messages for that extension.
If a new voice message has been left in your message box, you will hear dial tone 4 after going off-hook.
In addition, if your telephone has a Message button or Message/Ringer Lamp, the corresponding button
or lamp will light when a voice message has been left.
Dial Tone 4
1 s
112 User Manual
1.6.2 Using Voice Messaging (Built-in Simplified Voice Message [SVM])