Filter
Top Products
Leica M-series User Manual 35
FluoCombi III™ – Adjusting the Parfocality (cont'd.)
9. By turning the objective ring, focus on the
specimen until the specimen appears abso-
lutely sharp.
10. Enlarge the view just enough for the center
of the specimen to be visible in the field of
view.
11. Refocus.
12. Tighten the clamping screw (see Step 7).
13. Rotate the stereo planachromatic objective
under the beam path.
This causes the two objectives to be parfo-
cal. This means that from then on, you can
toggle between the two objectives without
refocusing.