Filter
Top Products
Leica M-series User Manual 31
FluoCombi III™ – Preparations
Before assembling the FluoCombi™,
you have to disconnect all instruments
from the power supply. Failure to observe these
instructions can result in damage to the micro-
scope and the connected instruments.
Preparations
1. Remove the two screws used as transport
anchors.
2. Screw the two screws into the holes
provided for storage.
In this way, you can secure the FluoCombi III™
for transport whenever necessary.
3. Screw the 5× planapochromat into the
FluoCombi III™.
4. Screw the other planapochromatic stereo
objective into the FluoCombi III™.