Filter
Top Products
Leica M-series User Manual 111
Leica EL 6000 – Operation
Controls Running-time meter
The running-time meter measures the burn-
ing time of the lamp, not the switch-on time
of the Leica EL6000 compact light source. The
running-time meter displays its current status
in this format: hours – minutes.
1. Press the reset button to set the running-
time meter of the lamp to "0".
The running-time meter should be reset after
every lamp replacement so that it always
displays the current, accurate lamp life.
Discontinue using the built-in lamp when it
reaches the end of the life specified by the
manufacturer.
Shutter control
In the "open" position, the shutter of the
ρ
Leica EL 6000 is open—regardless of the
signal from the remote control.
If the shutter control is in the "remote" posi-
ρ
tion, the shutter is controlled by the remote
control.
Intensity switch
The intensity switch provides optical dimming
of the light in five fixed increments.
1 Power switch/power indicator
2 Reset button for running-time meter
3 Running-time meter
4 Shutter control
5 Intensity switch
13 24
5