Filter
Top Products
SECTION 7—SEAT AND ARMS
Part No. 1143205 33 Lynx™L-3 & Lynx L-4
FIGURE 7.4 Adjusting the Arm Width
Replacing Armrest Pads
NOTE: For this procedure, refer to FIGURE 7.5.
1. Remove the two mounting screws that secure the armrest pad to arm.
2. Remove the old armrest pad.
3. Install new armrest pad and securely tighten with existing mounting screws.
4. If necessary, repeat STEPS 1-3 to replace the other armrest pad.
FIGURE 7.5 Replacing Armrest Pads
Arm
Tube
Seat Frame
Knob
Arm
NOTE: Lynx L-3
shown. Lynx L-4
adjusts the same way.
Arm Pad
Arm
Mounting Screws