Filter
Top Products
SECTION 5—MAINTENANCE AND TROUBLESHOOTING
Lynx™L-3 & Lynx L-4 24 Part No. 1143205
Service Indicator Error Codes
NUMBER OF FLASHES PROBLEM SOLUTION
1 Batteries need charging. Recharge the batteries. Refer to
Removing/Installing the Battery Box
on page 38.
2 Low battery voltage. Recharge the batteries before using.
Refer to Charging the Batteries
on
page 41.
3 Battery voltage too high. Check battery condition and
connections. Contact a qualified
technician to check your battery
charger.
4 Motor current error. Scooter has drawn too much
current. Verify there are no objects
blocking the tires.
5 Brake release lever is disengaged. Engage the brake release lever.
Refer to Engaging/Disengaging the
Brake Release Lever on page 29.
Turn the key off, then on to reset. If
this does not correct the problem,
contact a qualified technician.
6 Throttle control lever not in neutral. Turn the scooter power off, verify
the throttle control lever is in the
center position, and turn the power
back on. If this does not correct the
problem, contact a qualified
technician.
7 Throttle control lever malfunction
or speed pot error.
Contact a qualified technician.
8 Motor problems. Contact a qualified technician.
9 Other internal errors. Contact a qualified technician.