Filter
Top Products
SECTION 7—SEAT AND ARMS
Lynx™L-3 & Lynx L-4 32 Part No. 1143205
Adjusting 90° Seat Swivel
ƽ WARNING
Ensure that seat is locked into the forward position before and during operation of
the scooter. Otherwise, injury to the user and/or damage to the scooter may result.
CAUTION
Use the seat swivel option with caution when accessories are installed (such as
safety flag, crutch/cane holder, etc.). Otherwise, damage to the scooter or property
may occur.
NOTE: For this procedure, refer to FIGURE 7.3.
1. Pull up the seat lock lever to unlock the seat.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat in the desired position.
NOTE: Ensure that the seat is locked in the forward facing position before operating the scooter.
FIGURE 7.3 Adjusting 90° Seat Swivel
Adjusting the Arm Width
NOTE: For this procedure, refer to FIGURE 7.4.
NOTE: When installing the arms during set up, the four mounting screws are installed on the seat
hinge for shipping purposes.
1. Loosen the knob securing the arm tube to the seat frame.
2. Push the arm in or out to the desired position.
Seat
Seat
Top View
View From Back
Seat
Lock
Lever