Filter
Top Products
SECTION 6—OPERATION OF THE POWERED SCOOTER
Part No. 1143205 29 Lynx™L-3 & Lynx L-4
Engaging/Disengaging the Brake Release Lever
ƽ WARNING
Ensure that the brake-release lever is in the engaged position before driving. There
should be an audible "click" when stopping and starting the scooter.
NOTE: For the following procedure, refer to FIGURE 6.2.
The brake release lever manually engages and disengages the brake. The brake release
lever is located under the seat on the right side.
The brake must be engaged in normal driving conditions. Activation of the throttle
control lever automatically releases the brake so that the powered scooter can drive.
Releasing the throttle control lever automatically engages the brake so as to prevent the
powered scooter from rolling on its own.
When the brake release lever is disengaged and the key is removed, the powered scooter
can be pushed. The powered scooter cannot be driven with the brake in the disengaged
position.
1. To engage the brake release lever (Drive) - Pull back the brake release lever.
2. To disengage the brake release lever (Push) - Push forward the brake release lever.
FIGURE 6.2 Engaging/Disengaging the Brake Release Lever
Brake Release Lever
Pull Back to Engage (Drive)
Push Forward to
Disengage (Push)
NOTE: Lynx L-3
shown. Lynx L-4 brake
release lever is in the
same location.