Filter
Top Products
- iv -
CAUTION
This instrument is available with multiple pin-outs.
Ensure electrical connections are correct.
CAUTION
The 400-I series flow meters are designed for IEC
Installation/Over voltage Category II – single phase receptacle
connected loads.
NOTE
The Hastings 400 Series flow meters are designed for
INDOOR and OUTDOOR operation.
CAUTION
In order to maintain the integrity of the Electrostatic Discharge
immunity both parts of the remote mounted version of the
HFM-I-400 instrument must be screwed to a well grounded
structure.
CAUTION
In order to maintain the environmental integrity of the
enclosure the power/signal cable jacket must have a diameter
of .157 - .315” (4 – 11 mm). The nut on the cable gland must
be tightened down sufficiently to secure the cable. This cable
must be rated for at least 85°C.