Filter
Top Products
4-13
1
2
3
4
5
Cover/Table of
Contents
Downloading Images
from the Camera,
and Camera Settings
Working with
Images in the
ZoomBrowser EX
Remote Shooting in
the EOS Capture
Troubleshooting
and Uninstalling
the Software
Index
Setting the EOS 5D
and EOS-1D Series
Cameras
Introduction
You can load saved tone curve files from a computer (p.2-13) and register up to 3 on the
camera. You can also select the tone curve that has been loaded into the [TCD 1] through
[TCD 3] tab sheets, from the list box shown in “Specifying the Parameters” (p.4-12).
O For more information on registering the tone curve ([TCD 1] through [TCD 3]) on the
camera, refer to “Setting the Processing Parameters” in the camera’s Instruction Manual.
O This function is compatible with the EOS-1Ds Mark II, EOS-1D Mark II, EOS-1Ds and
EOS-1D.
O With the EOS-1D, only one tone curve can be registered.
1
Click the [Tone curve] button (p.4-10).
¿ The [Tone curve settings] dialog box
appears.
O With the EOS-1Ds and EOS-1D, click the
[Parameters] button and then click the
[User-Defined Tone Curve] button on the
displayed [Parameters Settings] dialog
box.
2
Select the [TCD 1], [TCD 2] or [TCD 3] tab.
O For the EOS-1D, proceed to step 3.
3
Click the [Open] button.
¿ The [Open] dialog box appears.
4
Open the folder containing the tone curve, select a file, and then
click the [Open] button
¿ The tone curve is loaded.
Specifying the Tone Curve
5
Select a channel from the list and confirm.
6
Click the [Apply to camera] button.
¿ The tone curve is registered on the camera.
7
Click the [Close] button.
¿ The [Tone curve settings] dialog box closes.
Closes the dialog box.
Applies the settings to the camera.