Filter
Top Products
HE/001132 Page 41 of 92
Document No.001132, Revision 2.0
NodeID Livelink : 14140190
Agfa HealthCare 14 June, 2007
Table 2.2-31: Notification Event Information
Event Type
Name
Event Type ID Attribute Tag
Printer Status Info (2110, 0020)
Film Destination (2000, 0040)
Normal 1
Printer Name (2110, 0030)
Printer Status Info (2110, 0020)
Film Destination (2000, 0040)
Warning 2
Printer Name (2110, 0030)
Printer Status Info (2110, 0020)
Film Destination (2000, 0040)
Failure 3
Printer Name (2110, 0030)
Note:
If the Event Type Name = Warning or Failure then the warning/failure condition can be stored by the
SCP Printer Status Info argument.
N-GET is issued by "Workstation" (SCU) to retrieve an instance of the Printer SOP class. "Workstation"
specifies the UID of the SOP Instance to be retrieved. The supported N-GET attributes are listed in the table
below:
Table 2.2-32: Supported Attributes for N-GET on a Printer
Attribute Name Tag Value
Printer Status (2110,0010) NORMAL, WARNING, FAILURE
Printer Status Info (2110,0020)
Printer dependent
Printer Name (2110,0030) User defined name identifying the printer.
Manufacturer (0008,0070) Manufacturer of the printer
Manufacturer Model Name (0008,1090) Manufacturer’s model number of the printer
Device Serial Number (0018,1000) Manufacturer’s serial number of the printer
Software Versions (0018,1020)
Manufacturer's designation of software
version of the printer.
Date Last Calibration (0018,1200)
Date when the printer was last calibrated.
Time Last Calibration (0018,1201)
Time when the printer was last calibrated.
2.2.2.3.1.4 SOP Specific Conformance Print Job SOP Class
(1.2.840.10008.5.1.1.14)
The Print Job IOD is an abstraction of the Print Job transaction and is the basic information entity to monitor
the execution of the Print Process. A Print Job contains one film or multiple films, all belonging to the same
film session.
The Print Job SOP Class is created by N-ACTION operation of the Film Session SOP Class (§2.2.2.3.1.3.1),
Film Box SOP Class (§2.2.2.3.1.3.2), or Pull Print Request SOP Class. The Print Job SOP Instance is
deleted after the films are printed or after a failure condition.
"Workstation" (SCU) will accept the following DIMSE services: