Filter
Top Products
45
Setting the date
7 Set the date using the following keys.
RANGE key
..............
The key to select the digits to change the value.
The selected digits blink.
RE-ZERO key
.....
The key to increase the value by one.
MODE key
..........
The key to decrease the value by one.
PRINT key
..........
The key to store the new setting, display
end and proceed to step 8.
CAL key
...................
The key to cancel the new setting and
proceed to step 8.
Quitting the operation
8 The balance displays the next menu item of the function table.
Press the CAL key to exit the clock and calendar function and
return to the weighing mode.
Note Do not enter invalid values such as a non-existing date
when setting the time and date.
When the clock backup battery has been depleted, the
balance displays rtc pf . Under this condition, press
any key and set the time and date. The dead battery only
affects the clock and calendar function. Even so, the
function works normally as long as the AC adapter is
connected to the balance.
Store
Set the date