Filter
Top Products
32
Setting procedure
1 Press and hold the RANGE key until ba5fnc of the function table is displayed in the
weighing mode, then release the key
2 Press the RANGE key to select a class.
3 Press the PRINT key to enter the class
4 Press the RANGE key to select a item.
5 Press the RE-ZERO key to select a parameter for the selected item.
6 If storing parameters of the selected class, press the PRINT key.
Then the next class is displayed.
If canceling the current operation, press the CAL key. Then the next class is displayed.
7 When specifying parameters for another class, proceed to step 2.
When finishing the setting, press the
CAL key to return to weighing mode.