Filter
Top Products
39
Interval memory mode
The weighing data is periodically stored in memory.
Example For periodical weighing without a personal computer command and
to output all of the data, to a computer, at one time.
The GH series can use time and date with "
Time/Date output (
5-td
)"
.
Required setting dout prt 3 Interval memory mode
dout data 2 Data memory function is used
dout int Interval time
Optional setting dout 5-td1, 2, or 3 Adds the time and date.
10.5. Description of the Item "Data Format"
A&D standard format 5if type 0
This format is used when the peripheral equipment can receive the A&D format.
If an AD-8121B is used, set the printer to MODE 1 or 2.
This format consists of fifteen or sixteen characters excluding the terminator.
When numerical characters without decimal point are exceeded eight characters for the
GH-252, the format becomes sixteen characters.
A header of two characters indicates the balance condition.
The polarity sign is placed before the data with the leading zeros. If the data is zero, the plus
sign is applied.
The unit, consisting of three characters, follows the data.
DP (Dump print) format 5if type 1
This format is used when the peripheral equipment can not receive the A&D format.
If an AD-8121B is used, set the printer to MODE 3.
This format consists of sixteen characters excluding the terminator.
A header of two characters indicates the balance condition. No overload header is used.
The polarity sign is placed before the data, with spaces in place of leading zeros, if the data
is not zero or overloaded.
The unit, consisting of three characters, follows the data.
C
R
L
F
ST,+000.1278 g
ST
US
OL
QT
C
R
L
F
ST,+100.01278
g
Header Data Unit Terminator
Stable header Stable header of counting mode
Unstable header
Overload header
Header Data Unit Terminator
W T +0. 12 78 g
C
R
L
F
T
WT
US
QT
Stable header Stable header of counting mode
Unstable header
Header Data Unit Terminator