Filter
Top Products
14
5.2. Changing the Units
The units or modes can be selected and stored in the function table. The sequence of
displaying these can be arranged to fit the frequency of use.
The units stored are maintained in non-volatile memory, even if the AC adapter is removed.
1 Press and hold the RANGE key until ba5fnc of the
function table is displayed in the weighing mode, then
release the key.
2 Press the RANGE key several times to display Unit .
3 Press the PRINT key to enter the unit selection mode.
4 Specify a unit or mode in the order to be displayed
using the following keys.
RANGE key
.......
To display the units sequentially.
RE-ZERO key
....
To specify a unit or mode.
The stabilization indicator appears when the
displayed unit or mode is specified.
Examples
Unit Display
Gram g
Milligram mg
Counting mode pcs
Percent mode %
Densitymode d
5 Press the PRINT key to store the units or modes. The
balance displays end and then displays the next
menu item of the function table.
6 Press the CAL key to exit the function table. Then
the balance returns to the weighing mode with the
selected unit.
Displays the units
sequentially
Examples
Press and hold
To uni
t