Control Panel Options 47
E-EQ-RX2RG-B RX2 Reference Guide
Remove Programs
Access: Start | Settings | Control Panel | Remove Programs
No change from general desktop Remove Programs options. Select a program and click Remove.
Follow the prompts on the screen to uninstall user-installed only programs. The change takes
effect immediately.
RFID
Access: Start | Settings | Control Panel | RFID
Note: Any tag data retrieved and not saved is lost during a reboot or reset.
Factory Default Settings
Affects LXE
APIs?
Affects
RFIDApp?
Tags
Tag Types to Read – Class 0 Enabled No No
Class 0 Tag Read Attempts 4 Yes Yes
Tag Types to Read – Class 1 Enabled No No
Class 1 Tag Read Attempts 1 Yes Yes
Tag Types to Read – C1G2 Enabled No No
C1G2 Tag Read Attempts 1 Yes Yes
Class 0 Singulation ID 2 No No
C1G2 Q-Value 3 No No
Preamble Blank Yes
1
Yes
Postamble Blank Yes
1
No
Separator ^M^J
2
Yes
1
No
Filters
Select Blank Yes
1
No
Field Name Blank Yes
1
No
Offset Blank Yes
1
No
Mask Value Blank Yes
1
No
Read
Read Once on Key Press Enabled No No
Read Continuous on Key Press Disabled No No
Toggle On/Off with Key Press Disabled No No
Beep Once on Tag Read Enabled Yes Yes
Buzz during Read Cycle Enabled Yes Yes
Send Key Messages (Wedge) Enabled No No
Power
Output Power +30 dBm Yes
1
No
Modulation 95% Yes
1
No
Power Management 3 sec Yes
1
Yes
Disable Disabled Yes
1
Yes
Firmware
File Blank No No
1
These setting affect the LXE APIs, but can also be controlled by LXE APIs as well. For
example, if a Separator is set in the Control Panel, it affects the format of the data returned by
the LXERFIDTag1Read() API. However, the user application can also call the
LXERFIDSetSeparator() API to change the separator.
2
^M^J equal Carriage Return/Line Feed.
