A SERVICE OF

logo

Battery Charger 19
E-EQ-RX2RG-B RX2 Reference Guide
Battery Charger
For information on the RX2 Battery Charger, please refer to Appendix C, “RX2 Battery Charger”.
Charging the Internal Battery
Use the RX2 battery charger to charge the RX2’s internal battery. The RX2 battery charger
charges the internal battery in less than 6 hours.
The battery charger uses an adapter cable. One end of the cable has a “break away” quick
disconnect connection to reduce the chance of damage if the forklift is moved before the battery
charger is disconnected. The other end of the cable attaches to the RX2.
1 RX2 (Battery Powered)
2 RX2 Battery Charger, RX2A381CHGRUS
3 RX2 Power Connector
4 To RX2 Power Connector
5 Break Away Connector
Figure 2-6 Battery Charger and Cable
If time does not permit the recharging of the internal battery pack, a DC power connection can be
used.