A SERVICE OF

logo

Appendix B Additional Cofiguration Options 137
E-EQ-RX2RG-B RX2 Reference Guide
Power
Access: Start | Settings | Control Panel | Power
Set Power Off, Backlight properties. Review battery status and perform backup battery
charging/discharging.
Note: Control Panel parameters established in Power Properties affect the mobile device
operating system. Power Management settings in the RFID Configuration utility governs
power management of the RFID reader only.
Factory Default Settings
Battery N/A
Schemes – Battery Power
User Idle Never
System Idle Never
Suspend Never
Schemes – AC Power
User Idle Never
System Idle Never
Suspend Never
Battery
The Battery tab does not monitor the RX2 internal battery.
Schemes
Figure B-1 Power Schemes
All power management options should be set to Never.
IMPORTANT: Do not change the Switch to Suspend to any option other than Never. If the
RX2 enters suspend, the only way to wake from suspend is to reboot. If
suspend is enabled, reboot and change the value back to Never.