A SERVICE OF

logo

External Connectors 15
E-EQ-RX2RG-B RX2 Reference Guide
Power Connector
The Power Supply connector is used to:
Connect the RX2 to an external DC power source
Charge the optional internal battery when connected to the RX2 Battery Charger.
The RX2 can accept DC input voltages in the range of 10 to 16 Volts.
When the RX2 detects that a charger is connected via Pin 3, the RX2 is Off regardless of the
position of the power switch.
2
3
4
5
1
Figure 2-5 The Power Connector
Pinout
Pin Signal
1 Battery Charger Positive (+)
2 Battery Positive (+)
3 Charger Detect
4 Ground (–)
5 Chassis Ground (–)