A SERVICE OF

logo

External Connectors 13
E-EQ-RX2RG-B RX2 Reference Guide
If necessary, a new ActiveSync connection must be established (unplug the USB connector for the
PC and reinsert after the RX2 has completed bootup). ActiveSync Remote Display must be
restarted.
Note: To reset to factory default values, please refer to Chapter 3 “System Configuration”
section titled “Utilities”.
External Connectors
USB-C Connector
A D9 connector, labeled “USB-C” is provided on the RX2. Via the proper adapter cable, this
connector provides a USB Type A Client connection for use with ActiveSync.
USB Host Cable
USB-C
MX3XA069CBLD9USBCLNT Port Label on RX2
Pinout
Mobile Device End Goes To USB Type A Plug End
1 Host Detect 1
2 Not Used
3 D + (Green Wire) 3
4 Not Used
5 Ground (Black Wire) 4
6 Not Used
7 D - (White Wire) 2
8 Not Used
9 Not Used
Figure 2-3 USB Type A to Serial Port Cable Pinout
ActiveSync
Connect from USB-C port to USB Type A Host -- a laptop/desktop, etc.