A SERVICE OF

logo

E-EQ-RX2RG-B RX2 Reference Guide
Chapter 5 Wireless Network Configuration
Introduction
The RX2 computer is equipped with either a Summit or Cisco radio. The Summit radio is an
802.11b/g radio. The Cisco radio is an 802.11b radio. The radio can be configured for no
encryption, WEP encryption or WPA security.
Because the RX2 does not maintain date/time when Off, authentications using
certificates are not supported on the RX2.
Please refer to the table below for the security options supported for each radio type.
Radio Type
Security Options
Supported
Summit Cisco
None Yes Yes
WEP Yes Yes
LEAP Yes Yes
WPA-PSK Yes Yes
WPA/LEAP Yes Yes
EAP-FAST Yes No
Note: The instruction in this chapter assume an ActiveSync connection has been made between
the RX2 and a PC and that ActiveSync Remote Display has been started on the PC.
Please refer to Chapter 3, “System Configuration” for instructions.