116 Cisco Radio
RX2 Reference Guide E-EQ-RX2RG-B
Profiles Tab
Use this option to manage profiles and review firmware information, status, statistics and wireless
radio survey data.
Profile Parameter Default Profile Parameter Default
SSID Blank LEAP Disabled
Client Name Blank Mixed Mode Disabled
Infrastructure Mode Yes World Mode Disabled
Power Save Mode Fast PSP Data Rates Auto
Network Security Type None Transmit Power MAX
WEP No WEP Offline Channel Scan Enabled
Authentication Types Open
Select an active profile to manage.
!
Peer to peer (ad hoc) mode is not supported on the RX2. Infrastructure Mode
must be set to Yes.
Figure 5-21 Cisco Profile Properties Screen
See “No Security”, WEP” or “LEAP” for details on completing the Profiles screen.
Firmware Tab
Displays the current firmware version and allows you to load new firmware. Click the Browse
button to locate the new firmware file.
Status Tab
Immediately runs status on : signal strength and signal quality.
Statistics Tab
Select the Receive Stats or Transmit Stats. The data is displayed on the screen.
Survey Tab
Immediately runs signal strength and quality and link speed. An option is available to Setup
parameters for Active Mode reporting.
