70 Configuring PAD/ATPAD Ports
ATPAD Ports
ATPAD Port Statistics
Function
When you select Detailed ATPAD Port Statistics, a series of screens appears that
provides information about the state and status of the ATPAD port.
What You See in
the First Screen
Figure 14 illustrates the first screen of Detailed ATPAD Port Statistics.
Figure 14. ATPAD Port Statistics - Screen 1
Description of
Terms — First
Screen
The first Detailed ATPAD Port Statistics screen contains this information:
Node: Address: Date: Time:
Detailed ATPAD Port Statistics: Port 3 Page: 1 of 2
Port Number: 3 Port Type: ATPAD Port Status: Up
Port Speed: 9600 Port State: Data
Port Utilization In: 0% Port Utilization Out: 1%
Physical Summary:
Parity Errors: 0 Overrun Errors: 0 Framing Errors: 0
Data Summary:
IN OUT IN OUT
Characters: 252 3807 Characters/sec: 0 18
Packets: 252 274 Packets/sec: 0 0
Number of Packets Queued: 0
Interface Summary: EIA-232-D DCE INPUT OUTPUT
DTR RTS MB P14 DSR DCD RI CTS
State: Connected (SIMPLE) H H H L L H H L
Press any key to continue (ESC to exit)...
Screen Term Tells You...
Port Number Number of the port
Port Type Type of port: ATPAD
Port Status Status of the port: Up
Port Speed The configured port speed
Port State These are the possible states:
• ATPAD: The port is in Command mode
• PAD: The port is in Data mode
Port Utilization: IN/OUT Percentage of port bandwidth being used
Physical Summary Number of Parity, Overrun, and Framing
errors since the last reset
