52 Configuring PAD/ATPAD Ports
Remote PAD Parameter Table Record
• #108: Disconnect Character (0 to 127)
• #109: Form Feed Padding (0 to 255)
• #110: Esc Forwarding Delay Handling (0 to 255)
• #111: Echo Control (0 to 3)
• #112: Dynamic Data Forwarding (0, 1)
• #113: Hewlett-Packard flow control (0 to 4)
• #114: PAD Mode (0 to 2)
• #115: Data Forwarding Criteria (0 to 2)
• #116: Short Timer Duration (0 to 255)
• #117: EIA Signalling Action (0, 1)
• #118: Message Assembly (0, 1)
• #119: DCD to Data Timer Duration (0 to 255)
Note
If you enter 0 (zero), the entry is ignored.
#1 Parameter Number
(continued)
#1 Parameter Value
Range: 0 to 255
Default: 0
Description: Specifies the X.3 parameter value (in the PAD Profile Table) sent
to the remote PAD when connection is made.
Entering an incorrect value for a particular parameter causes the
value to be ignored.
Example:
Step 1:
Set the Parameter Value (or press
<CR>
).
Result:
The next Parameter Number appears, followed by the next
Parameter Value.
Step 2:
Set a parameter value for #1 Parameter Number and #1
Parameter Value.
Result:
#2 Parameter Number and then #2 Parameter Value appear.
The sequence repeats until you enter one of these occur:
• A Parameter Number and Parameter Value for each parameter
listed in the PAD profile table
•
<;>
to implement the values
<ESC>
to abort the process
