54 Configuring PAD/ATPAD Ports
Detailed PAD Port Statistics
What You See in
the Second Screen
Figure 10 shows the second screen of the Detailed PAD Port Statistics.
Figure 10. Example of Detailed PAD Port Statistics, Second Screen
Data Summary: IN/OUT Summary of the characters, packets, and
frames being sent and received over the port
EIA Summary Summary of the EIA control signals being
sent and received over the port
Possible states are:
• NULL
• Connected (SIMPLE)
• Idle, Connected (DTR), Wait For Clear
(DTR), Wait for DTR (DTR)
• Idle (DTRP), Call Detected (DTRP),
Connected (DTRP)
• Idle, Call Detected (DIMO), Incoming
Call Detected (DIMO), Connected
(DIMO), Clear Confirm (DIMO)
• Idle, RI On (EMRI), RI Off (EMRI),
Wait for RTS (EMRI), Connected
(EMRI), Wait for DTR (EMRI)
Screen Term Tells You...
(continued)
Node: Address: Date: Time:
Detailed PAD Statistics: Port 3 Page: 2 of 3
Call Summary:
Current Status: Disconnected
Time until next auto-call attempt: 0 secs
Number of auto-call attempts: 0
Last clear cause code: 0 (Cleared by other end)
Last clear diagnostic code: 0 (No more information)
Last Inbound Call:
Called Address:
Calling Address:
Facilities:
CUD:
Last Outbound Call:
Called Address:
Calling Address:
Facilities:
CUD:
Press any key to continue (ESC to exit)...
