A SERVICE OF

logo

4 Configuring PAD/ATPAD Ports
PAD Port Configuration
PAD Port Configuration
Introduction
In order to configure a PAD port, you must first access the CTP on your PathBuilder
S200 series switch.
Note
Refer to the
Configuration Basics Guide
for CTP procedures.
PAD Port
Configuration
Record
Figure 2 shows the PAD port configuration parameters.
Figure 2. PAD Port Record
Node: Address: Date: Time:
Menu: Configure Path: (Main.6)
Node
Port
Port Name
*Port Number
*Port Type
PAD
Connection Type
Port Control
Port Speed
Auto Baud Sequence
Data Bits Per Character
Device Parity
Number of Stop Bits
Profile Name
Call Control
Terminal Control
PAD Prompt Entry Number
Remote PAD Parameters Number
Autocall Mnemonic
Autocall Timeout
Maximum Number of Autocall Attempts
Subaddress
Group Subaddress
CUG Membership
Billing Records
Invitation to Clear
Call Attempt Timeout
*Protection Level (DCP Only)
Reconnection Timeout (DCP Only)
Reconnection Tries Limit (DCP Only)
Maximum Receive Buffer Length
PAD COmmand Language
NUI Facility Format
VUI verification timer
Max NUI violations
Action Type for NUI violations