16 Configuring PAD/ATPAD Ports
PAD Port Configuration
*Protection Level
Range: NONE, CP_ONLY, FULL_DCP
Default: NONE
Description: Specifies how Data Connection Protection is implemented for this
port:
• NONE: The feature is turned off.
• CP_ONLY: Connection protection only.
• FULL_DCP: Full data and connection protection.
Valid only when the Data Connection Protection Option has been
purchased for this node.
Note
Changes to this parameter require a Node Boot to take effect.
Reconnection Timeout
Range: 1 to 128
Default: 2
Description: • Specifies how many seconds the Data Connection Protection
feature waits between reconnection attempts.
• The call originator determines the value.
If symmetric operation is required, the Reconnection Timeout and
the Reconnection Tries limit should be equal.
Valid only when the Data Connection Protection Option has been
purchased for this node.
Reconnection Tries Limit
Range: 0 to 127
Default: 4
Description: • Specifies the number of times that the Data Connection
Protection feature attempts to reconnect before clearing
the call.
• The call originator determines the value.
If 0 is entered, there will be no attempt to reconnect. If symmetric
operation is required, the Reconnection Timeout and the
Reconnection Tries limit should be equal.
Valid only when the Data Connection Protection Option has been
purchased for this node.
