Configuring PAD/ATPAD Ports 67
ATPAD Ports
Packet Size
Range: 128, 256, 512, 1024
Default: 128
Description: Maximum size of packets that the ATPAD forms.
Boot Type: A Port boot is required for the change to take effect.
Echo
Range: ON, OFF
Default: ON
Description: Specifies whether Echo is enabled or disabled when the port is in
the Command Mode.
Boot Type: A Port boot is required for the change to take effect.
Answer Mode
Range: AUTO, MAN, NONE
Default: AUTO
Description: Determines whether incoming calls are answered automatically or
manually (using the ATA command). Selecting NONE bars
incoming calls.
Boot Type: A Port boot is required for the change to take effect.
Stored Addresses
Range: 4 sets of 0 to 64 alphanumeric characters
Default: (blank)
Description: Used to make calls with the ATDSn command. The addresses may
be in mnemonic form (if preceded by a DOT) or in the form of an
X.28 call command.
Note
Pressing the space bar blanks out this field.
Boot Type: A Port boot is required for the change to take effect.
