Configuring PAD/ATPAD Ports 41
PAD Profile Table Record
#111, Echo Control
Range: 0 to 3
Default: 0
Description: Specifies how the PAD handles echoing of data when #2 Echo = 1:
• 0: No Priority. Data is output, and characters are echoed as
they arrive.
• 1: Input Priority. PAD holds output until input from the
terminal is finished.
• 2: Output Priority. PAD echoes input after output.
• 3: Formatted Screen. PAD echoes one block of data for each
packet sent from the host and assumes that the packet will
reformat the screen or move cursor to the next field.
Note
Disabled when #2 Echo = 0
#112, Dynamic Data Forwarding
Range: 0, 1
Default: 0
Description: Determines if the PAD dynamically forwards data packets as
bandwidth becomes available on the network link:
• 0: Dynamic Data Forwarding OFF
• 1: Dynamic Data Forwarding ON
Note
When enabled, parameters 1, 2, 3, 4, 7, 15, 16, 17, 18, 20, 100,
101, 102, 106, 108, 110, 111, and 113 are ignored.
#113, Hewlett-Packard Flow Control
Range: 0 to 4
Default: 0
Description: Controls Hewlett-Packard Flow Control:
• 0: No HP flow control
• 1: HP host ENQ/ack control
• 2: HP terminal ENQ/ack control
• 3: HP host XON/XOFF control
• 4: HP terminal XON/XOFF control
