Configuring PAD/ATPAD Ports 43
PAD Profile Table Record
#117, EIA Signalling Action
Range: 0, 1
Default: 0
Description: Specifies the EIA signalling action (when #114, PAD Mode = 1
or 2).
• 0: None
• 1: Raise DCD before and after transmission.
Note
A change to this parameter only takes effect if you purchased the
Transparent Polled Async option for this node.
#118, Message Assembly
Range: 0, 1
Default: 0
Description: Allows the PAD to collect async messages from the network
before sending to the attached device:
• 0: Disabled
• 1: Enabled
Note
A change to this parameter only takes effect if you purchased the
Transparent Polled Async option for this node.
#119, DCD to Data Timer Duration
Range: 0 to 255
Default: 0 (disables this parameter)
Description: Specifies the time, in milliseconds, that DCD is held high before
data transmission to the attached device (when #117, EIA
Signalling Action = 1).
Note
Entering zero (0) will disable this parameter.
Note
A change to this parameter only takes effect if you purchased the
Transparent Polled Async option for this node.
