Filter
Top Products
TELEDYNE INSTRUMENTS
Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation
A-18 05928 Rev F.0B
PRINTED DOCUMENTS ARE UNCONTROLLED DCN 5063
RCELL_PROP
1/ºC
0.3 (prop. band
= 3.3 ºC)
0–10
Reaction cell temperature PID
proportional coefficient.
RCELL_INTEG
— 0.005 0–10
Reaction cell temperature PID
integral coefficient.
RCELL_DERIV
— 0.5 0–10
Reaction cell temperature PID
derivative coefficient.
O2_CELL_CYCLE
10
Seconds 10 0.5–30
O
2
cell temperature control cycle
period.
O2_CELL_PROP
10
— 1 0–10
O
2
cell PID temperature control
proportional coefficient.
O2_CELL_INTEG
10
— 0.1 0–10
O
2
cell PID temperature control
integral coefficient.
O2_CELL_DERIV
10
— 0 (disabled) 0–10
O
2
cell PID temperature control
derivative coefficient.
IZS_CYCLE
1
Seconds 2 0.5–30
IZS temperature control cycle
period.
IZS_PROP
1
1/ºC
1 (prop. band
= 1 ºC)
0–10
IZS temperature PID proportional
coefficient.
IZS_INTEG
1
— 0.03 0–10
IZS temperature PID integral
coefficient.
IZS_DERIV
1
— 0 0–10
IZS temperature PID derivative
coefficient.
650,
550
3
HVPS_SET
Volts
Warnings:
400–900,
400–700
3
0–2000
High voltage power supply
warning limits. Set point is not
used.
MAX_PMT_DETECTOR
mV 499 5 0–5000
PMT detector maximum warning
limit.
450
PHOTO_ABS_LIMITS
1
mV
Warnings:
125–625
0–5000
Pre-amplified UV lamp
minimum/maximum warning
limits. Set point is not used.
3500
UV_LAMP_LIMITS
mV
Warnings:
1000–4995
0–5000
UV lamp minimum/maximum
warning limits. Set point is not
used.
ELEC_TEST_LEVEL
12
— 0 0–65535 Electrical test level setting.
OPTIC_TEST_LEVEL
12
— 0 0–65535 Optical test level setting.
CONC_LIN_ENABLE
3
— ON OFF, ON
ON enables concentration
linearization; OFF disables it.
SERIAL_NUMBER
— “000 00000 ”
Any character
in the allowed
character set.
Up to 100
characters
long.
Unique serial number for
instrument. Enclose value in
double quotes (“) when setting
from the RS-232 interface.
DISP_INTENSITY
— HIGH HIGH,
MED,
LOW,
Front panel display intensity.
Enclose value in double quotes
(“) when setting from the RS-232
interface.