Filter
Top Products
TELEDYNE INSTRUMENTS
Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation
A-14 05928 Rev F.0B
PRINTED DOCUMENTS ARE UNCONTROLLED DCN 5063
DARK_MODE
5
— AUT O OFF,
AUTO,
CMND
Dark calibration mode. OFF
disables it; AUTO does it
periodically; CMND does it only
when commanded. Enclose
value in double quotes (“) when
setting from the RS-232
interface.
DARK_ENABLE
1, 3, 4
— ON,
OFF
4
OFF, ON
ON enables PMT/UV dark
calibration; OFF disables it.
DARK_FREQ
Minutes 30,
720
3
0.1–1440 Dark calibration period.
DARK_PRE_DWELL
Seconds 10 1–60
Dwell time after closing dark
shutter or turning off lamp or
selecting preamp range.
DARK_POST_DWELL
Seconds 10,
30
3
1–180
Dwell time after opening dark
shutter or turning on lamp.
DARK_SAMPLES
Samples 5 1–10
Number of dark samples to
average.
DARK_FSIZE
Samples 2 1–100
Dark offset moving average filter
size.
DARK_LIMIT
mV 200,
400
3
0–1000 Maximum dark offset allowed.
SO2_TARG_ZERO1
Conc 0 -100–999.99
Target SO
2
concentration during
zero calibration of range 1.
SO2_SPAN1
Conc 400,
4000
3
0.01–9999.99
Target SO
2
concentration during
span calibration of range 1.
SO2_SLOPE1
PPB/mV,
PPM/mV
3
1 0.25– 4 SO
2
slope for range 1.
SO2_OFFSET1
mV 0 -1500–1500 SO
2
offset for range 1.
SO2_TARG_ZERO2
Conc 0 -100–999.99
Target SO
2
concentration during
zero calibration of range 2.
SO2_SPAN2
Conc 400,
4000
3
0.01–9999.99
Target SO
2
concentration during
span calibration of range 2.
SO2_SLOPE2
PPB/mV,
PPM/mV
3
1 0.25– 4 SO
2
slope for range 2.
SO2_OFFSET2
mV 0 -1500–1500 SO
2
offset for range 2.
CO2_TARG_SPAN_CONC
11
% 12 0.1–1000
Target CO
2
concentration during
span calibration.
CO2_SLOPE
11
— 1 0.5–5 CO
2
slope.
CO2_OFFSET
11
% 0 -10–10 CO
2
offset.
O2_TARG_SPAN_CONC
10
% 20.95 0.1–100
Target O
2
concentration during
span calibration.
O2_SLOPE
10
— 1 0.5–2 O
2
slope.
O2_OFFSET
10
% 0 -10–10 O
2
offset.
RANGE_MODE
— SNGL SNGL,
DUAL,
AUTO,
Range control mode. Enclose
value in double quotes (“) when
setting from the RS-232
interface.