Filter
Top Products
Program Run Options
Repeats: up to 9999 cycles
Guaranteed Soak: active:at start of each program segment
arming: preset at run start, or manually during program run
criteria: temperature error 0.5oC, or relative humidity error 1%
action: program time base is arrested until the condition returns inside limits.
Run start facilities: in-cycle start (specify time into first cycle)
delayed start (allows unsupervised start).
Monitoring displays
Steady state: setpoints, digital channel status
running program: setpoints, digital channel status, soak status, hold status,
time into program run, number of cycles remaining
turn on/off timebase hold, turn on/off guaranteed soak.
parameters: temperature, humidity
type:
high, low, deviation
range: chamber range
Log contentactual temperature, actual humidity, time
setpoint temperature (synch start), setpoint humidity (synch start)
Log interval:one minute
Log information source: control probes
Log entry size: 100 bytes
Log triggers: manual, synchronised, alarm
Log preview: simple trend graphic
File facilities: load, delete
Log format: comma separated values (import to industry standard
spreadsheets).
internal floppy diskettes (2), one system and one programAog data disk
50 way connector interfaces inside chamber to SSR drives.
Facilities:
Alarms.
Data Logging
Storage media:
Digital outputs:
Digital input: dedicated to the External Hold facility (internal access only, contact
SANYO Gallenkamp PLC or your dealer for applications)
Data communications: port on chamber: RS232,25 pin "D"
support software: available separately
hard copy: program printouts are available using the above software
65