Filter
Top Products
2.1.1 Construction
Interior
High quality stainless steel welded and vapour sealed.
Exterior/finish
Zinc coated mild steel with a staved acrylic, textured finish. The interior surfaces of
the mild steel are protected with rubberised paint and sealed against the ingress of
moisture.
Insulation
Minimum of 75mm of polyurethane foam/glass wool.
Access
Full sized insulated outer door with silicone rubber seal.
If fitted, full sized inner glass door with silicone rubber seal.
One or more 66mm diameter silicone rubber cable entry port in left hand wall.
Shelf
One solid stainless steel shelves with three shelf positions.
All models have a double skinned working chamber base which can be used for test
samples.
False roof
Provided to prevent condensate droplets from falling on the test samples.
Castors
Nylon castors are fitted to floor standing models; front castors are lockable.
Drain
Provided for drainage of excess moisture.
Vent
Provided in the rear of the cabinet to allow for expansion and contraction during
temperature changes.
Can also be used, in conjunction with the cable port, to provide air exchange to prevent
the build up of humidity or contaminating gases from test samples.