Multiquip RX 1510-C/-I/-CI Hair Care Product User Manual


 
RX 1510-C/-I/-CI
– 87 –
OF
C B
AS
7) Unscrew
OF
oil filter.
Leaking lubricating oils pollute the soil!
► Collect leaking engine oil and dispose together with the oil filter in an
environmentally friendly manner!
► Do not spill engine oil.
► Collect leaking fuel, do not let it seep into the ground.
ENVIRONMENT
8) Clean thread with a fibre-free rag.
9) Screw new oil filter in and only tighten by hand.
10) Screw plug
C
onto the oil drain line again and secure with the
B
clip. Observe
installation position of the line.
11) Fasten oil drain line
AS
with retaining clip
A
.
12) Refill engine oil (pay attention to viscosity - see technical data)
13) Pull the dipstick out.
14) Wipe the dipstick with a dry, fibre-free rag.
15) Insert the dipstick up to the stop in its fixture.
16) Pull the dipstick out again and read the oil level. ► The oil level should be
between the two markings. More engine oil must be filled in, if the oil level is too
low (only use engine oils with the same viscosity).
Maintaining the machine