Filter
Top Products
RX 1510-C/-I/-CI
– 57 –
Driving functions
Display Executed functions
F I 0010 Driving Right forward
F I 0011 Driving Right forward High speed
F I 0020 Driving Right backward
F I 0021 Driving Right backward High speed
F I 0100 Driving Left forward
F I 0101 Driving Left forward High speed
F I 0110 Driving Left forward Right forward
F I 0111 Driving Left forward Right forward High speed
F I 0120 Driving Left forward Right backward
F I 0121 Driving Left forward Right backward High speed
F I 0200 Driving Left backward
F I 0201 Driving Left backward High speed
F I 0210 Driving Left backward Right forward
F I 0211 Driving Left backward Right forward High speed
F I 0220 Driving Left backward Right backward
F I 0221 Driving Left backward Right backward High speed
4.4.6 Cockpit display with infrared control
Start / Stop function
Characteristic Control mode Code
number:
Meaning:
F I 4010 Toggle switch„Start” is activated. ► Starting procedure is
initiated.
F I 4020 The motor has started. ► Release toggle switch „Start”.
F - 4050 This error message appears, if the toggle switch is released
during the starting procedure, the engine has not yet started
and it is set to start again immediately after releasing the toggle
switch. This function prevents the starter engaging, while the
engine is still in motion.
F I 4100 Toggle switch„Stop” is activated. ► Stop procedure is initiated.
► The machine controller waits, until the generator signal, the
speed signal and the oil pressure signal are not sent anymore.
F I 4200 Stop sequence is continued.
F I 4300 The operating hour meter is secured. K15 is then switched off.
F I 4400 The operating hour meter is saved".
Display and operating elements: