Filter
Top Products
RX 1510-C/-I/-CI
– 60 –
OS
HD
5.2.2 Checking engine oil level
OS
The dipstick is located on the right side of the engine underneath the cooling
water tank. The engine has been filled in the factory with engine oil, viscosity
class 15W40. If there is the need to change to a different viscosity class (e.g.:
permanent extreme outdoor temperatures), the oil must be changed.
1) Park the machine on flat ground.
NOTE
If it is determined during the daily oil level check that hydraulic oil is missing,
immediately examine all aggregates, lines, and hoses for leaktightness and fill up
missing hydraulic oil before beginning work.
Refilling hydraulic oil:
1) Open
HD
cap.
2) Fill in hydraulic oil until the fill level is located between the markings.
Start-up