Filter
Top Products
RX 1510-C/-I/-CI
– 73 –
F I 4300
6. Using the machine
6.1 Safety instructions
6.1.1 General
• Only qualified and appropriately trained specialised personnel, with a minimum
age of 18 years, may operate the machine.
• Persons acting under the influence of drugs, medicines or alcohol may not operate
the machine.
• If you should not have already made yourself familiar with the control and display
elements of this machine, you must read Section 4. Display and control elements
and thereby make yourself familiar with the functions. All display and control
elements are described there in detail.
• For operating the machine, the specifications in the Subsection 1.1.3 Areas
of application and in Section 2.2 Intended use/Product safety must be observed.
• Desist from any method of operation which could pose a safety hazard or impair
the static stability of the machine.
• Never travel on slopes transversely, but always directly upwards or downwards.
• Damp and loose substrates substantially reduce the machine's grip on sloping
surfaces and inclines. When driving on inclines and sloping surfaces adjust the
speed of the machine to the terrain.
• Soil condition and weather influences impair the climbing power of the machine.
Never drive up or down slopes steeper than the climbing ability of the machine.
• Keep your distance from edges and embankments.
• When leaving the machine it must always be safeguarded against unintentional
rolling away or unauthorised use. Always attach chock blocks when turning the
machine off on slopes.
• Check before driving, whether persons or items are in the driving range.
• No one may be present in the danger area of the machine.
• Always give way to loaded transport vehicles.
• The operator must always keep visual contact to the machine when operating it
with the infrared control.
► End of the stop procedure. „F I 4300” is displayed. The operating hour meter
is secured. The machine shuts down. Restarting is only possible after the end
of this stop sequence.
Operation: