RX 1510-C/-I/-CI
– 82 –
Work on the battery
– When carrying out work at the battery, never smoke or expose to a naked
flame.
– Do not let acid get on to hands or clothes. In the case of injuries by acid rinse
with clear water and consult a physician.
– Never place any tools on the battery.
– Dispose of old batteries in compliance with regulations.
8.1.5 Working on the fuel system
• No naked flames, no smoking, do not spill fuel.
• Collect leaking fuel, do not allow to drain into the soil and dispose in an
environment-friendly manner.
8.1.6 Cleaning work
• Never carry out cleaning work with the engine running.
• Never use petrol or other easily flammable materials for cleaning.
• Cover all electrical components and the insulating material when cleaning with
the steam cleaner respectively do not expose to the direct water or steam jet.
• Do not direct the cleaning jet into the silencer.
8.1.7 After completing maintenance work
• All protective devices must be replaced after cleaning and maintenance work.
• Carry out function checks.
8.1.8 Repair
• Attach a warning sign to the defective machine.
• Only qualified and assigned persons may carry out repair work.
8.1.9 Exchanging drums
• Only use hoisting gear with appropriate carrying capacity!
• Observe dead weight of the drum!
8.1.10 Working on the hydraulic system
• Only persons with special hydraulics knowledge and experience may work on
hydraulic equipment.
• Depressurise the hydraulic system before working on it.
– Hydraulic oil escaping under high-pressure can penetrate the skin and cause
severe injuries.
– Immediately consult a physician in the case of injuries caused by oil escaping
under high-pressure, since serious infections can otherwise result.
– When carrying out adjusting operations on the hydraulic system do not stand in
front or behind the drum.
– Do not misadjust the relieve pressure valves.
• Drain the hydraulic oil at operating temperature
– Risk of scalding!
– Collect escaping hydraulic oil and dispose in an environmentally compatible
manner.
– Never start the engine, if the hydraulic oil has been drained.
Maintaining the machine